Aerosport Products

Switches

 
     
 
lefttop
 

 

Switches

Aerosport Products is offering switches as a compliment to our instrument panels. The switches can be backlit via LED. Switches are available in Red, White, or Black. Additionally, you can choose from our stock lettering options. Custom lettering is available, please call for a quote.

 

Due to the complexities and multiple combinations of switch configurations, we are only selling the switches via the telephone or email correspondence. Please give Geoff a call at (614) 834-8659 or email us by clicking <HERE>.

 

 

Switches
 
 
ASW001-DPST on-none-off single LED
$15.00
ASW002-DPDT on-none-on   single LED
$19.00
ASW003-DPDT  on-off-on    Dual LED
$19.00
 
Switch Mounting Panels
 
 
ASW004-VME end bracket
$3.00
ASW005- VMM middle bracket
$3.00
ASW006- VMS  Single bracket
$3.00
 
Switch Rockers with stock lettering
 
 
ASW007- Black single led rocker with lettering
$4.00
ASW008- Red single LED rocker with lettering
$5.00
ASW009- White single LED rocker with lettering
$5.00
ASW014 - Black Double LED rocker with lettering
$6.00
Call for custom graphic prices
 
 
Switch Rockers without lettering
 
 
ASW011- Black single led rocker with out lettering
$3.00
ASW012- Red single LED rocker with out lettering
$4.00
ASW013- White single LED rocker with out lettering
$4.00
ASW015 - Black Double LED rocker with out lettering
$5.00
ASW010-Rocker removal tool
$2.00

 

 

 

 

 

 

 

 

 

 

 

 

Electrical
Contact Rating 
4VA@ 24VDC (MAX) resistive
15 amps, 125 VAC
10 amps, 250 VAC
1/2 HP 125-250 VAC
20 amps, 4-14 VDC
15 amps, 15-28 VDC
10A 14VT
6A 125 VAC L
Dielectric Strength
1500 Volts RMS
Insulation Resistance
50 Megohms
Initial Contact Resistance
10 milliohms max. @ 4 VDC
Life
50,000- 100,000 cycles circuit dependent
Contacts
Silver cad-oxide, silver tin-oxide, fine silver
Terminals
Brass or copper/silver plate 1/4”
6.3mm Quick Connect terminations standard
Solder lug, Wire Lead
Mechanical:
Endurance
150,000 cycles minimum
   

 

Aerosport Products offers three versions of switches that are custom manufactured to our specifications.  Each switch has one or two white LEDs. 

 

 

On all three models, the contacts on the right are coupled to the LED and follow the state of the contacts on the left.  For example, if you connect 14vdc to terminal #2 and ground to terminal #7, the LED will illuminate when terminals #5 and #6 are switched together. 

 

On the DPDT version with a single LED, with 14vdc connected to terminal #2 and ground to terminal #7, the LED will illuminate when terminals #5 and #6 are switched together.   However, when the switch connects terminals #4 and #5, no LED is illuminated.

 

On the DPDT version with a dual LED, with 14vdc connected to terminal #2 and ground to terminal #7, one LED will illuminate when terminals #5 and #6 are switched together.   However, when the switch connects terminals #4 and #5, the other LED is illuminated.

 

Some customers have requested that they would prefer that the LED is continuously lit.  You can accomplish this by connecting 14vdc to terminal #3 on the Single LED switches and to terminals #3 and #1 on the dual LED switch.

 

You may vary the intensity of the LEDs by connecting the LED terminal to a dimmer.

If you are connecting to a Vertical Power product (VP-X, VP-200, VP-400), you will want to use the non-powered pole to connect to your Vertical Power unit.  You will also have to run 14vdc to the other pole to power the LED.   You can also connect the power circuit to energize a bank of switches as well as a dimmer to control LED intensity.

 

If you don’t have a Vertical Power unit, you can use both poles of the switch to control multiple circuits.  You have to ensure that the switch is appropriately configure to your application.  Remember, that one pole is used to power the LED.  You can also attach another device on this circuit.   If you choose to install a dimmer, you will need to ensure that the dimmer circuit has no negative impact on the device you are switching on that pole.

 

Payment for all orders are processed through Paypal. You will have the option of using a credit card (Visa/MC/Discover/Amex) or your Paypal Account. Paypal does not share your financial information with us.

 

Online Web ordering is for customers in the continental United States (CONUS). If you are an International customer or are in Hawaii or Alaska, you will receive an additional invoice via Paypal to cover the incremental fees to ship your products. This invoice MUST be paid prior to an order being shipped. Please call or email for these shipping fees if you want to know the fees in advance.

 

By purchasing these products from Aerosport Products, the Purchaser agrees that he/she will not copy, reverse engineer, modify use to make molds or otherwise attempt to use the purchased products design / functionality to develop a competing product.

 

Updated 12/6/2013

 

 

 


 

 

 

 

 

 
righttop