Aerosport Products is offering switches as a compliment to our instrument panels. The switches can be backlit via LED. Switches are available in Red, White, or Black. Additionally, you can choose from our stock lettering options. Custom lettering is available, please call for a quote.
Due to the complexities and multiple combinations of switch configurations, we are only selling the switches via the telephone or email correspondence. Please give Geoff a call at (614) 834-8659 or email us by clicking here.
|
Switches
|
|
|
|
|
|
ASW001-DPST on-none-off single LED
|
$15.00 |
|
ASW002-DPDT on-none-on single LED
|
$19.00 |
|
ASW003-DPDT on-off-on Dual LED
|
$19.00 |
|
|
|
|
Switch Mounting Panels
|
|
|
|
|
|
ASW004-VME end bracket
|
$3.00 |
|
ASW005- VMM middle bracket
|
$3.00 |
|
ASW006- VMS Single bracket
|
$3.00 |
|
|
|
|
Switch Rockers with stock lettering
|
|
|
|
|
|
ASW007- Black single led rocker with lettering
|
$4.00 |
|
ASW008- Red single LED rocker with lettering
|
$5.00 |
|
ASW009- White single LED rocker with lettering
|
$5.00 |
|
ASW014 – Black Double LED rocker with lettering
|
$6.00 |
|
Call for custom graphic prices
|
|
|
|
|
|
Switch Rockers without lettering
|
|
|
|
|
|
ASW011- Black single led rocker without lettering
|
$3.00 |
|
ASW012- Red single LED rocker without lettering
|
$4.00 |
|
ASW013- White single LED rocker without lettering
|
$4.00 |
|
ASW015 – Black Double LED rocker without lettering
|
$5.00 |
|
ASW010-Rocker removal tool
|
$2.00 |
|
Electrical Contact Rating:
|
|
|
|
4VA@ 24VDS (MAX) ressistive
|
|
|
15 amps, 125 VAC
|
|
|
10 amps, 250 VAC
|
|
|
1/2 HP 125-250 VAC
|
|
|
20 amps, 4-14 VDC
|
|
|
15 amps, 15-28 VDC
|
|
|
10A 14VT
|
|
|
6A 125 VAC L
|
|
Dielectric Strength:
|
1500 Volts RMS
|
|
Insulation Resistance:
|
50 Megohms
|
|
Initial Contact Resistance:
|
10 milliohms max. @ 4 VDC
|
|
Life:
|
50,000- 100,000 cycles circuit dependent
|
|
Contacts:
|
Silver cad-oxide, silver tin-oxide, fine silver
|
|
Terminals:
|
Brass or copper/silver plate 1/4”
|
|
|
6.3mm Quick Connect terminations standard
|
|
|
Solder lug, Wire Lead
|
| Mechanical Endurance: |
150,000 cycles minimum |
|
|
Aerosport Products offers three versions of switches that are custom manufactured to our specifications. Each switch has one or two white LEDs.
On all three models, the contacts on the right are coupled to the LED and follow the state of the contacts on the left. For example, if you connect 14vdc to terminal #2 and ground to terminal #7, the LED will illuminate when terminals #5 and #6 are switched together.
On the DPDT version with a single LED, with 14vdc connected to terminal #2 and ground to terminal #7, the LED will illuminate when terminals #5 and #6 are switched together. However, when the switch connects terminals #4 and #5, no LED is illuminated.
On the DPDT version with a dual LED, with 14vdc connected to terminal #2 and ground to terminal #7, one LED will illuminate when terminals #5 and #6 are switched together. However, when the switch connects terminals #4 and #5, the other LED is illuminated.
Some customers have requested that they would prefer that the LED is continuously lit. You can accomplish this by connecting 14vdc to terminal #3 on the Single LED switches and to terminals, #3 and #1 on the dual LED switch. You may vary the intensity of the LEDs by connecting the LED terminal to a dimmer.
If you are connecting to a Vertical Power product (VP-X, VP-200, VP-400), you will want to use the non-powered pole to connect to your Vertical Power unit. You will also have to run 14vdc to the other pole to power the LED. You can also connect the power circuit to energize a bank of switches as well as a dimmer to control LED intensity.
If you don’t have a Vertical Power unit, you can use both poles of the switch to control multiple circuits. You have to ensure that the switch is appropriately configured to your application. Remember, that one pole is used to power the LED. You can also attach another device on this circuit. If you choose to install a dimmer, you will need to ensure that the dimmer circuit has no negative impact on the device you are switching on that pole.
